英语翻译1.axial run-out /parallel alignment fixture ,relative to Y-/Z-axis2Concentricity plug gauge at a distance of 50mm3.Parallel alignment of the aligning slot (3rd slot from the rear ),relative to the movement of the saddle slide (Y-axis)4 me

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/10 01:29:06
英语翻译1.axial run-out /parallel alignment fixture ,relative to Y-/Z-axis2Concentricity plug gauge at a distance of 50mm3.Parallel alignment of the aligning slot (3rd slot from the rear ),relative to the movement of the saddle slide (Y-axis)4 me

英语翻译1.axial run-out /parallel alignment fixture ,relative to Y-/Z-axis2Concentricity plug gauge at a distance of 50mm3.Parallel alignment of the aligning slot (3rd slot from the rear ),relative to the movement of the saddle slide (Y-axis)4 me
英语翻译
1.axial run-out /parallel alignment fixture ,relative to Y-/Z-axis
2Concentricity plug gauge at a distance of 50mm
3.Parallel alignment of the aligning slot (3rd slot from the rear ),relative to the movement of the saddle slide (Y-axis)
4 measure axial run out of the support segments with touch probe
5 measure difference in height of the support segments with touch probe
.

英语翻译1.axial run-out /parallel alignment fixture ,relative to Y-/Z-axis2Concentricity plug gauge at a distance of 50mm3.Parallel alignment of the aligning slot (3rd slot from the rear ),relative to the movement of the saddle slide (Y-axis)4 me
1.轴摆动/平行排列夹具,相对于Y - / z轴方向上的
表2同心度塞在距离50毫米
3.平行排列的调整3rd槽槽(从后方),相对于运动的马鞍滑板(维度)
4测量轴段跑出了支持与触动探针
5质量差在高度的支持与触动探针段

1.axial运行输出/平行排列夹具,相对于Y-/Z-axis
2Concentricity在距离为50mm塞规 在调整插槽
3.Parallel对齐(第三槽从后面),相对在马鞍幻灯片运动(Y轴)
4轴运行措施与接触式探针的支持环节出
5在触摸探针测量不同高度的支持分部

1.轴摆动/平行排列夹具,相对于Y - / z轴方向上的